Make Money Online Easy


Please Prepare Your Battery Pack

Posted by JessieDAlexander342 on November 29, 2012 in Uncategorized |

Figure2** The block plan for the introduction of P-MOS structure, the actual use of N-MOS structure.Dell Inspiron 1000 Battery, ** The block plans for the principle construction, the actual circuit to do any changes without notice.
Set of samples packageFigure 3** According to the design of packaging, protection board named “male turtle,Inch magnetic pulse causes named “female turtle.” ** The particular package suitable for the use of special mosaic layer and other shell could require additional special packaging options.

Safety Board set trials the installation of
Please ready your battery pack, and then continue with the installation following plan: male Houin installed in any of the batteries, the dark line will exchange the present only the damaging terminal of the electric battery: red line then the battery positive, nowhere line then the battery pack negative, black collection in series connected to a battery under the positive: above diagram, your turtle mounted on a battery of a battery, Dell Inspiron 1000 Battery power, Dell Inspiron 2200 Battery, cellphone, in order to better protect the thermal runaway, the best of them installed in the battery pack near the middle of the electric battery.Figure 4
protect of protection function setting

(1), over-charging defense settings: When the battery pack is assembled on the male tortoise, remember to use the original 12v charger will charge battery total, and then switch to 60V 12v charger for 48V battery charging group, or the correct to use 48V charger 36V battery pack packs to recharge, whenever we can turn green, along with a very long period of time don’t turn red, on this occasion charging loop is actually locked, to restore your charge, please disconnect the charger and then plug in the battery charger can be restored . Overcharge security in the practical application with the exception for the protection of high voltage cut-off charger charging enterprise to prevent battery damage due to overcharge.Dell Inspiron 2200 Battery, Overcharge safety voltage is manufacturing facility set value of space temperature 15.35V ± 0.15V, when the temperature modifications, and changes to guard voltage,Dell Inspiron 1000 Battery power, Dell Inspiron 2200 Battery, Dell 312-0292 Battery Dell INSPIRON 2600 Battery power, 25 ? for 15.35V, 15 , at around 20.53V, 0 ?, when the 16.7V , 35 ? for 15.17V, 45 ? for Fourteen.99V, 55 ? above are 13.2V.

(2), over-discharge protection settings: the battery can be assembled in the car ride until the controller to the low-voltage protection, or to use the electric discharge models into 10.5V/12V, after that use the electric insert or other resistive load to carry on to discharge when the voltage will drop to Ten.2V after the discharge can be terminated, a long time to load connection, the battery current is not less than 10V/12V.

(Several), thermal runaway defense, detection: the first band of battery charging, when the voltage is higher than 13.5V/12V, the male turtle while using hair dryer to setback hot, when the temperature reaches about Fifty-five ? when the charger will turn green, into the thermal runaway protection.Conditions permit, you are able to put the whole number of cells into incubators, and also to maintain a temperature associated with 60 ?, charging will be prohibited discharge let.

For more information about Android please visit the website.

Tags: , , , ,

Copyright © 2011-2020 All rights reserved.
Desk Mess Mirrored version theme from